X90 vs X99: ITA Tools Compression Bits Compared Head to Head

X90 vs X99 compression bits side by side: geometry, carbide grade, Platinium coating and tool life - which one earns its price.

Read Article18 August 202612 min read

X90 vs X99: ITA Tools Compression Bits Compared Head to Head

All Articles

9 articles

First CNC Machine for Your Furniture Workshop: Choose Right or Pay Twice

workshop-technology

12 May 20261 min

First CNC Machine for Your Furniture Workshop: Choose Right or Pay Twice

Buying your first CNC for a small furniture workshop: four mistakes that cost twice, from 25 years of London implementation experience.

Panel Nesting with Melamine Chipboard: How to Avoid Chipping on Both Faces

Nine causes of melamine chipping in CNC nesting, each with a fix - tooling, feeds and a pre-nesting checklist you can pin to the machine.

melamine chippingnestinglaminated chipboard

Read

What Is a Compression Router Bit and When Should You Use One?

CNC Router Bits

31 March 202612 min

What Is a Compression Router Bit and When Should You Use One?

Compression router bits explained: how they work, upcut vs downcut vs compression, i1 crossover point, and when to use X90/X99 for CNC nesting in UK workshops.

compression router bitupcutdowncut

Read

Diamond vs Carbide Router Bits: When to Switch and Why It Pays for Itself

CNC Router Bits

18 March 202612 min

Diamond vs Carbide Router Bits: When to Switch and Why It Pays for Itself

Diamond PCD router bits vs carbide — real cost analysis, tool life data & practical switching guide for UK furniture manufacturers. Save 80% per cut.

diamond vs carbidePCDrouter bits

Read

Router Bits for MDF: Why Diamond Outlasts Carbide 30 to 1

CNC Router Bits

16 February 202610 min

Router Bits for MDF: Why Diamond Outlasts Carbide 30 to 1

MDF destroys carbide. Diamond PCD lasts around 30x longer - cost per metre compared, plus the budget X90/X99 route for lower volumes.

MDFrouter bitsdiamond PCD

Read

Feeds and Speeds for CNC Routing: The Practical Guide for Furniture Makers

CNC Router Bits

16 February 202615 min

Feeds and Speeds for CNC Routing: The Practical Guide for Furniture Makers

Chip load, RPM and feed rates for CNC routing chipboard, MDF and solid wood - the numbers that decide whether your tooling survives.

X90 vs X99: ITA Tools Compression Bits Compared Head to Head

All Articles

First CNC Machine for Your Furniture Workshop: Choose Right or Pay Twice

Panel Nesting with Melamine Chipboard: How to Avoid Chipping on Both Faces

What Is a Compression Router Bit and When Should You Use One?

Diamond vs Carbide Router Bits: When to Switch and Why It Pays for Itself

Router Bits for MDF: Why Diamond Outlasts Carbide 30 to 1

Feeds and Speeds for CNC Routing: The Practical Guide for Furniture Makers

Get 5% Off