Profiling HM Heads for Edgebanding Machines
Cutter heads intended for edge profiling for edge banding machines with mechanical feed. Suitable for MDF and chipboard panels.
Diameter | Cutting length | Radius | Number of flutes | Unit | Stock | Order | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 107 | 40 | 6 | SCM | RH/LH | 2 | 12 | GK2.107040012.R2R | £150.30 | pcs | 10+ | |
| 55.3 | 16 | 5.5 | SCM | LH | 2 | 3 | GKN.055316005.00L | £326.75 | pcs | 9 | |
| 55.3 | 16 | 5.5 | SCM | RH | 2 | 3 | GKN.055316005.00R | £326.75 | pcs | 10+ | |
| 55.3 | 16 | 14 | SCM | LH | 2 | 3 | GKN.055316014.00L | £156.84 | pcs | 10+ | |
| 55.3 | 16 | 14 | SCM | RH | 2 | 3 | GKN.055316014.00R | £156.84 | pcs | 2 | |
| 55.3 | 16 | 21 | SCM | LH | 2 | 3 | GKN.055316021.00L | £102.73 | pcs | 10+ | |
| 55.3 | 16 | 21 | SCM | RH | 2 | 3 | GKN.055316021.00R | £102.73 | pcs | 10+ | |
| 55.3 | 16 | 21 | SCM | LH | 1 | 3 | GKN.055316021.01L | £102.73 | pcs | 6 | |
| 55.3 | 16 | 21 | SCM | RH | 1 | 3 | GKN.055316021.01R | £102.73 | pcs | 7 | |
| 63.6 | 16 | 30 | SCM | LH | 0.5 | 4 | GKN.062016030.01L | £274.47 | pcs | 9 | |
| 63.6 | 16 | 30 | SCM | RH | 0.5 | 4 | GKN.062016030.01R | £274.47 | pcs | 7 | |
| 65 | 16 | 26 | SCM | LH | 0.5 | 3 | GKN.065016022.02L | £163.37 | pcs | 3 | |
| 65 | 16 | 26 | SCM | RH | 0.5 | 3 | GKN.065016022.02R | £163.37 | pcs | 4 | |
| 69 | 16 | 15 | VITAP | LH | 3 | 6 | GKN.069024015.00L | £294.07 | pcs | - | |
| 69 | 16 | 15 | VITAP | RH | 3 | 6 | GKN.069024015.00R | £294.07 | pcs | - |
